共搜索到13690条信息,每页显示10条信息,共1369页。用时:0小时0分0秒453毫秒
elastic modulus for a rolled titanium sheet and the results are consistent well with experimental ones. Keyword: hexagonal metallic plate; elasticity; texture; pole... with a hexagonal structure Abstract: The presence of texture was known to cause anisotropy of elastic properties of polycrystalline materials with a hexagonal structure......
at 623 K. This is mainly attributed to rotational dynamic recrystallization (RDX) during the hot rolling. Key words: AZ31 magnesium alloy; texture; extruded sheet; inverse pole figure  ... was measured by the linear intercept method. X-ray texture analysis was performed in a Rigaku D/max 2 500 VB+ diffractometer. Texture was presented by means of inverse pole figures which were calculated......
warm rolled at 300 °C because of higher density of shear bands. The warm rolled ZK60 alloy sheet exhibited strong (0002) pole texture, the intensity of (0002) pole figure decreases with the increasing.... The texture of warm rolled ZK60 alloy sheet shows that the basal pole spreads out to transverse direction. The maximum pole intensity of (0002) pole figure decreases with the increasing of rolling......
ODF Determination from One Complete Pole Figure蒋君祥,王福,刘燕声,王沿东,梁志德摘 要:ODFDeterminationfromOneCompletePoleFigureJiangJunxiang;WangFu;LiuYansheng;WangYandongandLiangZhide(蒋君祥)(王福)(刘燕声)(王沿东)(梁志德)(De...关键词:......
to understand the deformation features of an ultrathin strip. Figure 3 shows the texture components and fiber characterization of face-centered cubic (FCC) metals in ODF sections when φ2=0° and 45°. Table 2 shows the miller indices and Euler angles of important texture components in FCC metals. Figure 4 shows that the ODFs of rolling textures of commercially pure aluminum during the ultrathin strip rolling......
on a WE-1000B universal testing machine. Microstructures of the rolled AZ31 sheets were investigated by optical microscopy. Texture measurements were carried out on a Dmax1400 X-ray diffractometer. Pole figures... no significant influence on distribution of texture, and it simply lowers the pole density of basal planes (Fig.5). Fig.4 Pole figures of cold-rolled AZ31 sheet Different textures reflect different......
texture. Key words: 1545 alloy aluminum sheet; in-plane anisotropy; inverse pole figure; crystallographic texture CLC number: TG146.2 Document code: A 1 INTRODUCTION The in-plane anisotropy.... For this reason, strong crystallographic texture comes into being. The anisotropy of crystallography can induce the anisotropy of mechanical properties. The analysis of the inverse pole figures......
by initial texture formed in extruded preforming, and the initial orientation is at basal texture {0001}<> located in the centre of pole figure (Y0), while the basal texture is symmetrical and parallel... irregular metallic flow, which is illustrated in Ⅱ and Ⅲ zones in Fig.5. Meanwhile, the shear stress also leads to grain rotation along boundaries with certain angles, and basal texture and grain orientation......
J. Cent. South Univ. (2017) 24: 1164-1173 DOI: 10.1007/s11771-017-3519-4 Crushing analysis and multi-objective optimization of bitubular hexagonal columns with ribs ZOU Xiang(邹翔), GAO Guang-jun(高广军... of the bitubular hexagonal columns with middle to middle (MTM) ribs is the best, followed by the bitubular hexagonal columns with corner to corner (CTC) ribs and the bitubular hexagonal columns without......
]. Fig. 1 Microstructure and texture of initial CP-Ti sheet: (a) Optical microstructure; (b) Measured (0002) pole figure obtained by XRD, (PImax=maximum pole intensity); Contour levels (a.u.): 1.0, 2.0... with Lmax=16. The ODFs were present in the form of iso-intensity contour lines which represent the orientation densities in constant φ2 sections. The pole figure calculated by ODF method was compared......